From b400aba3f82eb7a490bdbc8d141777e82d625ac8 Mon Sep 17 00:00:00 2001 From: Eugene Triguba Date: Sun, 18 Apr 2021 18:47:57 -0500 Subject: Update docs --- docs/source/configuring-system-lirc.rst | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) (limited to 'docs/source/configuring-system-lirc.rst') diff --git a/docs/source/configuring-system-lirc.rst b/docs/source/configuring-system-lirc.rst index 5122804..6527344 100644 --- a/docs/source/configuring-system-lirc.rst +++ b/docs/source/configuring-system-lirc.rst @@ -40,7 +40,11 @@ the remote configuration file. The RedRat3-II is now discontinued, although `its driver's are still available `_, but you could look into the `RedRatX `_ or see if you can find a `RedRat3-II used `_. Place this -generated remote configuration file in your ``lircd.conf.d`` folder. +generated remote configuration file in your ``/etc/lirc/lircd.conf.d`` folder. + +******************************* +Iguanaworks IR Transciever Note +******************************* If you're using an Iguanaworks IR Transciever, you may find the discussion below useful. Basically, the device should just work on the default driver. @@ -61,8 +65,8 @@ macOS ----- On macOS, the paths are almost the same as the Linux ones, just prefixed with ``/opt/local/``. -Therefore, the LIRC configuration is typically at ``/opt/local/etc/lirc/`` and the lircd socket -is at ``/opt/local/var/run/lirc/lircd`` +Therefore, the LIRC configuration is typically at ``/opt/local/etc/lirc/`` and the lircd +socket is at ``/opt/local/var/run/lirc/lircd``. Refer to the Linux section for the rest of the configuration as they are almost the same besides the ``/opt/local/`` prefix. However, on macOS, there is also no ``default`` driver like there is -- cgit v1.2.3