summaryrefslogtreecommitdiffstats
path: root/docs/source/configuring-system-lirc.rst
diff options
context:
space:
mode:
authorEugene Triguba <eugenetriguba@gmail.com>2021-04-18 18:47:57 -0500
committerEugene Triguba <eugenetriguba@gmail.com>2021-04-18 18:47:57 -0500
commitb400aba3f82eb7a490bdbc8d141777e82d625ac8 (patch)
tree98ff11d0da726cefcfee455dbcffdc9a8ed23959 /docs/source/configuring-system-lirc.rst
parentAdd note to customizing client (diff)
downloadlirc-b400aba3f82eb7a490bdbc8d141777e82d625ac8.zip
Update docs
Diffstat (limited to 'docs/source/configuring-system-lirc.rst')
-rw-r--r--docs/source/configuring-system-lirc.rst10
1 files changed, 7 insertions, 3 deletions
diff --git a/docs/source/configuring-system-lirc.rst b/docs/source/configuring-system-lirc.rst
index 5122804..6527344 100644
--- a/docs/source/configuring-system-lirc.rst
+++ b/docs/source/configuring-system-lirc.rst
@@ -40,7 +40,11 @@ the remote configuration file. The RedRat3-II is now discontinued, although
`its driver's are still available <https://www.redrat.co.uk/support/firmware-drivers/>`_, but you
could look into the `RedRatX <https://www.redrat.co.uk/products/redrat-x/>`_ or see if you can
find a `RedRat3-II used <https://www.ebay.com/sch/i.html?_nkw=redrat3-ii&_sacat=0>`_. Place this
-generated remote configuration file in your ``lircd.conf.d`` folder.
+generated remote configuration file in your ``/etc/lirc/lircd.conf.d`` folder.
+
+*******************************
+Iguanaworks IR Transciever Note
+*******************************
If you're using an Iguanaworks IR Transciever, you may find the discussion below useful. Basically,
the device should just work on the default driver.
@@ -61,8 +65,8 @@ macOS
-----
On macOS, the paths are almost the same as the Linux ones, just prefixed with ``/opt/local/``.
-Therefore, the LIRC configuration is typically at ``/opt/local/etc/lirc/`` and the lircd socket
-is at ``/opt/local/var/run/lirc/lircd``
+Therefore, the LIRC configuration is typically at ``/opt/local/etc/lirc/`` and the lircd
+socket is at ``/opt/local/var/run/lirc/lircd``.
Refer to the Linux section for the rest of the configuration as they are almost the same besides
the ``/opt/local/`` prefix. However, on macOS, there is also no ``default`` driver like there is