diff options
Diffstat (limited to 'docs/source/configuring-system-lirc.rst')
| -rw-r--r-- | docs/source/configuring-system-lirc.rst | 10 |
1 files changed, 7 insertions, 3 deletions
diff --git a/docs/source/configuring-system-lirc.rst b/docs/source/configuring-system-lirc.rst index 5122804..6527344 100644 --- a/docs/source/configuring-system-lirc.rst +++ b/docs/source/configuring-system-lirc.rst @@ -40,7 +40,11 @@ the remote configuration file. The RedRat3-II is now discontinued, although `its driver's are still available <https://www.redrat.co.uk/support/firmware-drivers/>`_, but you could look into the `RedRatX <https://www.redrat.co.uk/products/redrat-x/>`_ or see if you can find a `RedRat3-II used <https://www.ebay.com/sch/i.html?_nkw=redrat3-ii&_sacat=0>`_. Place this -generated remote configuration file in your ``lircd.conf.d`` folder. +generated remote configuration file in your ``/etc/lirc/lircd.conf.d`` folder. + +******************************* +Iguanaworks IR Transciever Note +******************************* If you're using an Iguanaworks IR Transciever, you may find the discussion below useful. Basically, the device should just work on the default driver. @@ -61,8 +65,8 @@ macOS ----- On macOS, the paths are almost the same as the Linux ones, just prefixed with ``/opt/local/``. -Therefore, the LIRC configuration is typically at ``/opt/local/etc/lirc/`` and the lircd socket -is at ``/opt/local/var/run/lirc/lircd`` +Therefore, the LIRC configuration is typically at ``/opt/local/etc/lirc/`` and the lircd +socket is at ``/opt/local/var/run/lirc/lircd``. Refer to the Linux section for the rest of the configuration as they are almost the same besides the ``/opt/local/`` prefix. However, on macOS, there is also no ``default`` driver like there is |